libvmem

libvmem − volatile memory allocation library

#include <libvmem.h>

cc ... -lvmem

Memory pool management:

VMEM *vmem_create(const char *dir, size_t size);
VMEM *vmem_create_in_region(void *addr, size_t size);
void vmem_delete(VMEM *vmp);
int vmem_check(VMEM *vmp);
void vmem_stats_print(VMEM *vmp, const char *opts);

Memory allocation related functions:

void *vmem_malloc(VMEM *vmp, size_t size);
void vmem_free(VMEM *vmp, void *ptr);
void *vmem_calloc(VMEM *vmp, size_t nmemb, size_t size);
void *vmem_realloc(VMEM *vmp, void *ptr, size_t size);
void *vmem_aligned_alloc(VMEM *vmp, size_t alignment, size_t size);
char *vmem_strdup(VMEM *vmp, const char *s);
size_t vmem_malloc_usable_size(VMEM *vmp, void *ptr);

Managing overall library behavior:

const char *vmem_check_version(
           unsigned major_required,
           unsigned minor_required);
void vmem_set_funcs(
           void *(*malloc_func)(size_t size),
           void (*free_func)(void *ptr),
           void *(*realloc_func)(void *ptr, size_t size),
           char *(*strdup_func)(const char *s),
           void (*print_func)(const char *s));

Error handling:

const char *vmem_errormsg(void);

libvmem provides common malloc-like interfaces to memory pools built on memory-mapped files. These interfaces are for traditional volatile memory allocation but, unlike the functions described in malloc(3), the memory managed by libvmem may have different attributes, depending on the file system containing the memory-mapped files. In particular, libvmem is part of the Non-Volatile Memory Library because it is sometimes useful to use non-volatile memory as a volatile memory pool, leveraging its capacity, cost, or performance characteristics.

libvmem uses the mmap(2) system call to create a pool of volatile memory. The library is most useful when used with Direct Access storage (DAX), which is memory-addressable persistent storage that supports load/store access without being paged via the system page cache. A Persistent Memory-aware file system is typically used to provide this type of access. Memory-mapping a file from a Persistent Memory-aware file system provides the raw memory pools, and this library supplies the more familiar malloc-like interfaces on top of those pools.

Under normal usage, libvmem will never print messages or intentionally cause the process to exit. Exceptions to this are prints caused by calls to vmem_stats_print(), or by enabling debugging as described under DEBUGGING AND ERROR HANDLING below. The library uses pthreads(7) to be fully MT-safe, but never creates or destroys threads itself. The library does not make use of any signals, networking, and never calls select() or poll(). The system memory allocation routines like malloc() and free() are used by libvmem for managing a small amount of run-time state, but applications are allowed to override these calls if necessary (see the description of vmem_set_funcs() below).

libvmem interfaces are grouped into three categories: those that manage memory pools, those providing the basic memory allocation functions, and those interfaces less commonly used for managing the overall library behavior. These groups of interfaces are described in the following three sections.

To use libvmem, a memory pool is first created. This is most commonly done with the vmem_create() function described in this section. The other functions described in this section are for less common cases, where applications have special needs for creating pools or examining library state.

Once created, a memory pool is represented by an opaque pool handle, of type VMEM *, which is passed to the functions for memory allocation described in the next section.

VMEM *vmem_create(const char *dir, size_t size);

The vmem_create() function creates a memory pool. The resulting pool is then used with functions like vmem_malloc() and vmem_free() to provide the familiar malloc-like programming model for the memory pool. vmem_create() creates the pool by allocating a temporary file in the given directory dir. The file is created in a fashion similar to tmpfile(3), so that the file name does not appear when the directory is listed and the space is automatically freed when the program terminates. size bytes are allocated and the resulting space is memory-mapped. The minimum size value allowed by the library is defined in <libvmem.h> as VMEM_MIN_POOL. Calling vmem_create() with a size smaller than that will return an error. The maximum allowed size is not limited by libvmem, but by the file system specified by the dir argument. The size passed in is the raw size of the memory pool and libvmem will use some of that space for its own metadata. vmem_create() returns an opaque memory pool handle or NULL if an error occurred (in which case errno is set appropriately). The opaque memory pool handle is then used with the other functions described in this man page that operate on a specific memory pool.

VMEM *vmem_create_in_region(void *addr, size_t size);

The vmem_create_in_region() is an alternate libvmem entry point for creating a memory pool. It is for the rare case where an application needs to create a memory pool from an already memory-mapped region. Instead of allocating space from a given file system, vmem_create_in_region() is given the memory region explicitly via the addr and size arguments. Any data in the region is lost by calling vmem_create_in_region(), which will immediately store its own data structures for managing the pool there. Like vmem_create() above, the minimum size allowed is defined as VMEM_MIN_POOL. The addr argument must be page aligned. vmem_create_in_region() returns an opaque memory pool handle or NULL if an error occurred (in which case errno is set appropriately). Undefined behavior occurs if addr does not point to the contiguous memory region in the virtual address space of the calling process, or if the size is larger than the actual size of the memory region pointed by addr.

void vmem_delete(VMEM *vmp);

The vmem_delete() function releases the memory pool vmp. If the memory pool was created using vmem_create_pool(), deleting it allows the space to be reclaimed.

int vmem_check(VMEM *vmp);

The vmem_check() function performs an extensive consistency check of all libvmem internal data structures in memory pool vmp. It returns 1 if the memory pool during the check is found to be consistent and 0 otherwise. Cases where the check couldn’t be performed, are indicated by a return value of -1. Since an error return indicates memory pool corruption, applications should not continue to use a pool in this state. Additional details about errors found are logged when the log level is at least 1 (see DEBUGGING AND ERROR HANDLING below). During the consistency check performed by vmem_check(), other operations on the same memory pool are locked out. The checks are all read-only; vmem_check() never modifies the memory pool. This function is mostly useful for libvmem developers during testing/debugging.

void vmem_stats_print(VMEM *vmp, const char *opts);

The vmem_stats_print() function produces messages containing statistics about the given memory pool. The output is printed using libvmem’s internal print_func function (see vmem_set_funcs() below). That means the output typically appears on stderr unless the caller supplies a replacement print_func or sets the environment variable VMEM_LOG_FILE to direct output elsewhere. The opts string can either be NULL or it can contain a list of options that change the stats printed. General information that never changes during execution can be omitted by specifying "g" as a character within the opts string. The characters "m" and "a" can be specified to omit merged arena and per arena statistics, respectively; "b" and "l" can be specified to omit per size class statistics for bins and large objects, respectively. Unrecognized characters are silently ignored. Note that thread caching may prevent some statistics from being completely up to date. See jemalloc(3) for more detail (the description of the available opts above was taken from that man page).

This section describes the malloc-like API provided by libvmem. These functions provide the same semantics as their libc namesakes, but operate on the memory pools specified by their first arguments.

void *vmem_malloc(VMEM *vmp, size_t size);

The vmem_malloc() function provides the same semantics as malloc(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It allocates size bytes and returns a pointer to the allocated memory. The memory is not initialized. If size is 0, then vmem_malloc() returns either NULL, or a unique pointer value that can later be successfully passed to vmem_free(). If vmem_malloc() is unable to satisfy the allocation request, a NULL pointer is returned and errno is set appropriately.

void vmem_free(VMEM *vmp, void *ptr);

The vmem_free() function provides the same semantics as free(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It frees the memory space pointed to by ptr, which must have been returned by a previous call to vmem_malloc(), vmem_calloc() or vmem_realloc() for the same pool of memory. Undefined behavior occurs if frees do not correspond to allocated memory from the same memory pool. If ptr is NULL, no operation is performed.

void *vmem_calloc(VMEM *vmp, size_t nmemb, size_t size);

The vmem_calloc() function provides the same semantics as calloc(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It allocates memory for an array of nmemb elements of size bytes each and returns a pointer to the allocated memory. The memory is set to zero. If nmemb or size is 0, then vmem_calloc() returns either NULL, or a unique pointer value that can later be successfully passed to vmem_free(). If vmem_calloc() is unable to satisfy the allocation request, a NULL pointer is returned and errno is set appropriately.

void *vmem_realloc(VMEM *vmp, void *ptr, size_t size);

The vmem_realloc() function provides the same semantics as realloc(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It changes the size of the memory block pointed to by ptr to size bytes. The contents will be unchanged in the range from the start of the region up to the minimum of the old and new sizes. If the new size is larger than the old size, the added memory will not be initialized. If ptr is NULL, then the call is equivalent to vmem_malloc(vmp, size), for all values of size; if size is equal to zero, and ptr is not NULL, then the call is equivalent to vmem_free(vmp, ptr). Unless ptr is NULL, it must have been returned by an earlier call to vmem_malloc(), vmem_calloc() or vmem_realloc(). If the area pointed to was moved, a vmem_free(vmp, ptr) is done. If vmem_realloc() is unable to satisfy the allocation request, a NULL pointer is returned and errno is set appropriately.

void *vmem_aligned_alloc(VMEM *vmp, size_t alignment, size_t size);

The vmem_aligned_alloc() function provides the same semantics as aligned_alloc(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It allocates size bytes from the memory pool and returns a pointer to the allocated memory. The memory address will be a multiple of alignment, which must be a power of two. If vmem_aligned_alloc() is unable to satisfy the allocation request, a NULL pointer is returned and errno is set appropriately.

char *vmem_strdup(VMEM *vmp, const char *s);

The vmem_strdup() function provides the same semantics as strdup(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It returns a pointer to a new string which is a duplicate of the string s. Memory for the new string is obtained with vmem_malloc(), on the given memory pool, and can be freed with vmem_free() on the same memory pool. If vmem_strdup() is unable to satisfy the allocation request, a NULL pointer is returned and errno is set appropriately.

size_t vmem_malloc_usable_size(VMEM *vmp, void *ptr);

The vmem_malloc_usable_size() function provides the same semantics as malloc_usable_size(3), but operates on the memory pool vmp instead of the process heap supplied by the system. It returns the number of usable bytes in the block of allocated memory pointed to by ptr, a pointer to a block of memory allocated by vmem_malloc() or a related function. If ptr is NULL, 0 is returned.

The library entry points described in this section are less commonly used than the previous section. These entry points expose library information or alter the default library behavior.

const char *vmem_check_version(
           unsigned major_required,
           unsigned minor_required);

The vmem_check_version() function is used to see if the installed libvmem supports the version of the library API required by an application. The easiest way to do this is for the application to supply the compile-time version information, supplied by defines in <libvmem.h>, like this:

reason = vmem_check_version(VMEM_MAJOR_VERSION,
                            VMEM_MINOR_VERSION);
if (reason != NULL) {
    /*  version check failed, reason string tells you why */
}

Any mismatch in the major version number is considered a failure, but a library with a newer minor version number will pass this check since increasing minor versions imply backwards compatibility.

An application can also check specifically for the existence of an interface by checking for the version where that interface was introduced. These versions are documented in this man page as follows: unless otherwise specified, all interfaces described here are available in version 1.0 of the library. Interfaces added after version 1.0 will contain the text introduced in version x.y in the section of this manual describing the feature.

When the version check performed by vmem_check_version() is successful, the return value is NULL. Otherwise the return value is a static string describing the reason for failing the version check. The string returned by vmem_check_version() must not be modified or freed.

void vmem_set_funcs(
           void *(*malloc_func)(size_t size),
           void (*free_func)(void *ptr),
           void *(*realloc_func)(void *ptr, size_t size),
           char *(*strdup_func)(const char *s),
           void (*print_func)(const char *s));

The vmem_set_funcs() function allows an application to override some interfaces used internally by libvmem. Passing in NULL for any of the handlers will cause the libvmem default function to be used. The library does not make heavy use of the system malloc functions, but it does allocate approximately 4-8 kilobytes for each memory pool in use. The only functions in the malloc family used by the library are represented by the first four arguments to vmem_set_funcs(). The print_func function is called by libvmem when the vmem_stats_print() entry point is used, or when additional tracing is enabled in the debug version of the library as described in the DEBUGGING AND ERROR HANDLING section below. The default print_func used by the library prints to the file specified by the VMEM_LOG_FILE environment variable, or to stderr if that variable is not set.

Two versions of libvmem are typically available on a development system. The normal version, accessed when a program is linked using the -lvmem option, is optimized for performance. That version skips checks that impact performance and never logs any trace information or performs any run-time assertions. If an error is detected during the call to libvmem function, an application may retrieve an error message describing the reason of failure using the following function:

const char *vmem_errormsg(void);

The vmem_errormsg() function returns a pointer to a static buffer containing the last error message logged for current thread. The error message may include description of the corresponding error code (if errno was set), as returned by strerror(3). The error message buffer is thread-local; errors encountered in one thread do not affect its value in other threads. The buffer is never cleared by any library function; its content is significant only when the return value of the immediately preceding call to libvmem function indicated an error, or if errno was set. The application must not modify or free the error message string, but it may be modified by subsequent calls to other library functions.

A second version of libvmem, accessed when a program uses the libraries under /usr/lib/nvml_debug, contains run-time assertions and trace points. The typical way to access the debug version is to set the environment variable LD_LIBRARY_PATH to /usr/lib/nvml_debug or /usr/lib64/nvml_debug depending on where the debug libraries are installed on the system. The trace points in the debug version of the library are enabled using the environment variable VMEM_LOG_LEVEL, which can be set to the following values:

0

This is the default level when VMEM_LOG_LEVEL is not set. Only statistics are logged, and then only in response to a call to vmem_stats_print().

1

Additional details on any errors detected are logged (in addition to returning the errno-based errors as usual). The same information may be retrieved using vmem_errormsg().

2

A trace of basic operations including allocations and deallocations is logged.

3

This level enables a very verbose amount of function call tracing in the library.

4

This level enables voluminous and fairly obscure tracing information that is likely only useful to the libvmem developers.

The environment variable VMEM_LOG_FILE specifies a file name where all logging information should be written. If the last character in the name is "-", the PID of the current process will be appended to the file name when the log file is created. If VMEM_LOG_FILE is not set, output goes to stderr. All prints are done using the print_func function in libvmem (see vmem_set_funcs() above for details on how to override that function).

Setting the environment variable VMEM_LOG_LEVEL has no effect on the non-debug version of libvmem.

The following example creates a memory pool, allocates some memory to contain the string "hello, world", and then frees that memory.

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <libvmem.h>

main()
{
    VMEM *vmp;
    char *ptr;

    /* create minimum size pool of memory */
    if ((vmp = vmem_create("/pmem-fs",
                                VMEM_MIN_POOL)) == NULL) {
        perror("vmem_create");
        exit(1);
    }

    if ((ptr = vmem_malloc(vmp, 100)) == NULL) {
        perror("vmem_malloc");
        exit(1);
    }

    strcpy(ptr, "hello, world");

    /* give the memory back */
    vmem_free(vmp, ptr);

    /* ... */
}

See http://pmem.io/nvml/libvmem for more examples using the libvmem API.

Unlike the normal malloc(), which asks the system for additional memory when it runs out, libvmem allocates the size it is told to and never attempts to grow or shrink that memory pool.

libvmem depends on jemalloc, written by Jason Evans, to do the heavy lifting of managing dynamic memory allocation. See:

http://www.canonware.com/jemalloc/

libvmem builds on the persistent memory programming model recommended by the SNIA NVM Programming Technical Work Group:

http://snia.org/nvmp

malloc(3), posix_memalign(3), strdup(3), mmap(2), strerror(3), jemalloc(3), libpmem(3).